Cisco Systems OL-15491-01 Meter minimum value no meter minimum value, Charge is 110 quadrans

Appendix A CSG2 Command Reference

meter minimum

meter minimum

To specify the minimum number of quadrans debited by the CSG2 for a service or session, use the meter minimum command in CSG2 service configuration mode. To return to the default behavior, use the no form of the command.

meter minimum value no meter minimum value

Syntax Description	value	Minimum number of quadrans debited for a service or session,
		excluding the value in meter initial. For example, to force the CSG2
		to debit 90 quadrans when less than 90 quadrans of network usage
		were used for the service, specify meter minimum 90. If the initial
		value is 20 quadrans and the minimum is 90 quadrans, then the
		minimum total charge is 110 quadrans. The minimum value is
		applied only if at least 1 session is granted network access for the
		service.
		The range is from 0 to 65535. The default value is 0.
Defaults	The default number is 0 quadrans.
Command Modes	CSG2 service configuration
Command History	Release	Modification
	12.4(11)MD	This command was migrated from CSG1.
		Changes from CSG1: None.
	If meter initial is set to 20 quadrans, and meter minimum is set to 90 quadrans, then the minimum total
Usage Guidelines
	charge is 110 quadrans.

If service duration is configured in the basis command, the usage is rounded up to the minimum value when the Service Stop is sent. For a minimum value of 90, 150 seconds of network usage is not rounded up for the purpose of calculating usage in the Service Stop, but, for example, 63 seconds of network usage is rounded up to 90 quadrans.

Note The rounding-up of network usage is not reflected in calculations for the Usage

Tag-Length-Value (TLV) in Service Reauthorization Requests.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-195