Cisco Systems OL-15491-01 Ip csg service, Activation Aoc append url Aoc confirm Aoc enable, 157

Appendix A CSG2 Command Reference

ip csg service

ip csg service

To configure a CSG2 content billing service, and to enter CSG2 service configuration mode, use the ip csg service command in global configuration mode. To turn off the content billing service, use the no form of this command.

ip csg service service-name

no ip csg service service-name

Syntax Description	service-name	Name of the content billing service, which is a component of a billing plan
		that is subscribed to by subscribers. The name can be from 1 to 16
		characters long, is not case-sensitive, and can include uppercase or
		lowercase letters (the CSG2 changes all letters to uppercase), numbers, and
		any special characters.

Defaults

Command Modes

Command History

Usage Guidelines

None

Global configuration

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1: None.

The CSG2 allows you to define a pool of up to 1024 services. You can authorize, for each subscriber, any number of services from that pool, but we recommend that the billing system not authorize more than 10 active services for each subscriber. Exceeding this guideline could lead to the following problems:

•The increase in the number of quota authorizations per subscriber can overload both the quota server and the CSG2.

•As the number of services for which a subscriber is actively authorized increases, the subscriber’s quota becomes fragmented. Although the CSG2 allows the billing system to recall and redistribute the quota so that the subscriber is not denied service because of quota fragmentation, the process increases overhead in both the quota server and the CSG2.

The CSG2 supports multiple protocols under a single service definition.

The characteristics of each content billing service are defined by the following commands:

•activation

•aoc append url

•aoc confirm

•aoc enable

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-157