Cisco Systems OL-15491-01 appendix Command Modes Command History Usage Guidelines Examples

Appendix A CSG2 Command Reference

ip (CSG2 content)

Command Modes

Command History

Usage Guidelines

Examples

CSG2 content configuration

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1: None.

This command is required to place content in service.

UDP ports 9200 and 9201 are well-known Wireless Session Protocol (WSP) and Wireless Transaction Protocol (WTP) wireless application protocol (WAP) ports. When a policy with parse protocol wap is associated with a content, use even-numbered UDP ports to designate WSP traffic, and use odd-numbered ports to designate WTP traffic.

Although you can use this command to specify a port number for Layer 3 content

(ip any any port-number), the CSG2 does not support Layer 3 content rules. The CSG2 ignores the specified port number, and the show ip csg content command displays the port number as 0.

The following example shows how to specify that, for content MOVIES_COMEDY, only flows for IP address 172.18.45.0/24 and TCP port 8080 are to be processed by the CSG2 accounting services:

ip csg content MOVIES_COMEDY

ip 172.18.45.0/24 tcp 8080

Related Commands	Command	Description
	ip csg content	Configures content for CSG2 services, and enters CSG2 content
		configuration mode.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-42	OL-15491-01