Cisco Systems OL-15491-01 appendix Ip csg quota-server messages, 104

Appendix A CSG2 Command Reference

ip csg quota-server messages

ip csg quota-server messages

To specify the maximum number of general packet radio service (GPRS) tunneling protocol prime (GTP’) messages that the CSG2 can buffer for all quota servers, use the ip csg quota-server messages command in global configuration mode. To restore the default settings, use the no form of this command.

ip csg quota-server messages number

no ip csg quota-server messages

Syntax Description	number	Maximum number of GTP’ messages that can be buffered for all quota
		servers. The range is from 1 to 65535. The default is 10000.
Defaults	The CSG2 buffers up to 10000 GTP’ messages.
Command Modes	Global configuration
Command History	Release	Modification
	12.4(11)MD	This command was introduced.

Usage Guidelines

Examples

We recommend that you change the number of GTP’ messages that can be buffered only when directed to do so by Cisco Technical Assistance Center (TAC) engineers. In most environments, the default value is the most appropriate setting.

The following example shows how to configure the CSG2 to buffer up to 12345 GTP’ messages:

ip csg quota-server messages 12345

Related Commands	Command	Description
	ip csg bma messages	Specifies the maximum number of general packet radio service
		(GPRS) tunneling protocol prime (GTP’) messages that the CSG2
		can buffer for all Billing Mediation Agents (BMAs).
	ip csg psd margin	Specifies the maximum number of general packet radio service
		(GPRS) tunneling protocol prime (GTP’) messages, beyond the size
		of the Billing Mediation Agent (BMA) message queue, that the
		CSG2 can buffer for the Cisco Persistent Storage Device (PSD).
	ip csg quota-server	Configures the CSG2 quota servers that return billing quota values
		for subscribers.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-104	OL-15491-01