Cisco Systems OL-15491-01 appendix Ip csg radius stop purge, 139

Appendix A CSG2 Command Reference

ip csg radius stop purge

ip csg radius stop purge

To specify the attribute that must be included in the RADIUS Accounting Stop request in order for the CSG2 User Table entry to be deleted, use the ip csg radius stop purge command in global configuration mode.

ip csg radius stop purge {radius-attribute-number vsa {vendor-id 3gpp} radius-subattribute-number}

Syntax Description	radius-attribute-number	Specifies the RADIUS attribute number. The range is from 1 to 255.
	vsa	Specifies the vendor-specific attribute (VSA).
	vendor-id	Specifies the vendor ID number. The range is from 1 to 16777215.
	3gpp	Specifies the Third Generation Partnership Project (3GPP) vendor
		ID.
	radius-subattribute-number	Specifies the subattribute number. The range is from 1 to 255.
Defaults	The subscriber entry is deleted when a RADIUS Accounting Stop is received.
Command Modes	Global configuration

Command History

Usage Guidelines

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1:

•The name of this command changed from radius stop purge to ip csg radius stop purge.

•The configuration mode for this command changed from module CSG configuration to global configuration.

•The 26 keyword was removed.

The ip csg radius stop purge command specifies the attribute (which might be a VSA) that must be included in the RADIUS Accounting Stop request in order for the CSG2 User Table entry to be deleted. The contents of the specified attribute are not examined.

Examples	The following example shows how to enable the ip csg radius stop purge command:
	ip csg radius stop purge 44

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-139