Cisco Systems OL-15491-01 appendix Ip csg psd drain packet

Appendix A CSG2 Command Reference

ip csg psd drain packet

ip csg psd drain packet

To define the number of packets to be drained from the Cisco Persistent Storage Device (PSD) per drain delay interval when the Billing Mediation Agent (BMA) becomes active, use the ip csg psd drain packet command in global configuration mode. To delete the drain packet, use the no form of this command.

ip csg psd drain packet number-of-packets

no ip csg psd drain packet

Syntax Description	number-of-packets	Number of packets to be drained from the PSD per drain delay interval. The
		range is from 1 to 64000. The default is 500.
Defaults	The default value is 500 packets.
Command Modes	Global configuration
Command History	Release	Modification
	12.4(11)MD	This command was introduced.
Usage Guidelines	The CSG2 can buffer GTP’ messages in the Cisco Persistent Storage Device (PSD), if so configured.
	(For more information, see the “Configuring PSD Support” section on page 7-1.) By default, the CSG2
	limits the rate at which GTP’ messages are read from the PSD to 500 packets/second. However, you can
	use the ip csg psd drain packet command to change that rate. For example, specifying that 1000 packets
	are to be drained per interval yields a rate of 1000 packets/second (1000 packets/1 second).
Examples	The following example shows how to specify that 1000 packets are to be drained from the PSD per drain
	delay interval:
	ip csg psd drain packet 1000
Related Commands	Command		Description
	ip csg psd		Configures a Cisco Persistent Storage Device (PSD).
	ip csg psd drain delay		Defines the delay interval, in seconds, before draining packets from
			the Cisco Persistent Storage Device (PSD) when the Billing
			Mediation Agent (BMA) becomes active.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-89