Cisco Systems OL-15491-01 appendix Command History Release Modification, Replicate Statistics

Appendix A CSG2 Command Reference

debug ip csg

Command History	Release	Modification
	12.4(11)MD	This command was migrated from CSG1.
		Changes from CSG1:

• The acl number, configuration sync, detail, dump, error, frag, global, ha, http, interm, ipc, mail, other, packet, priority, qs, replicate, service, session event, session state, stats, and vrf vrf-name, keywords and arguments were added.

• The any, bma, ipc, psd, and quota-serverkeywords were added for the gtp keyword.

• The agent, api, cpu, module number, quota, prepaid, record storage slot, and timer keywords and arguments were removed.

12.4(15)MD The crashinfo, ftp, iscsi, mail, and sip keywords were added.

Usage Guidelines To see most but not all debugging output, use the all option to turn on all debugging flags, and then use the no form of this command to exclude debugging output for any options that are not of interest to you.

Restrict the output of other CSG2 debugging commands to subscribers specified in the ACL.

Once the debug flags are set, they are automatically sent to the CSG2 cards when a configuration is downloaded. Similarly, changes in the debug settings are sent to the CSG2 cards that are being debugged.

Generating debugging output for ACL (that is, configuring the acl keyword) disables all of the following types of debugging:

• Configuration

• Error

• GTP

• IPC

• PSD

• RADIUS

• Replicate

• Statistics

• TLV

• UDB

You can use the show debug command to display the debug flag settings.

Note You must re-enter the debug command after every reload because it is not saved in the startup configuration.

Examples The following example shows how to turn on debugging for rtsp and udb:

debug ip csg rtsp debug ip csg udb

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-30	OL-15491-01