Cisco Systems OL-15491-01 appendix Class, Command History Release Modification

Appendix A CSG2 Command Reference

class

class

Syntax Description

Defaults

Command Modes

To specify a service class value, use the class command in CSG2 service configuration mode. To remove the service class value, use the no form of this command.

class value

no class value

value Specifies a value in the range 1 to 255.

None

CSG2 service configuration

Command History	Release	Modification
	12.4(11)MD	This command was migrated from CSG1.
		Changes from CSG1: None.

Usage Guidelines

Examples

Related Commands

The class command is used with fixed-record format to identify a service class value. This value is opaque to the CSG2 and has meaning only for the administrator. It is reported as tariff-class in fixed-record format call detail records (CDRs).

The following example specifies a class value for the service:

ip csg service FOO class 7

Command	Description
ip csg service	Configures a CSG2 content billing service, and enters CSG2 service
	configuration mode.
ip csg transport-type assign	Classifies data traffic on the basis of its access path.
mode	Specifies the mode for a CSG2 billing plan.
ip csg records format	Specifies variable or fixed CDR format.
owner	Specifies an identifier or name for a service owner.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-18	OL-15491-01