Cisco Systems OL-15491-01 appendix Aoc confirm token No aoc confirm, Token

Appendix A CSG2 Command Reference

aoc confirm

aoc confirm

To configure a token for use in Advice of Charge (AoC) URL-rewriting, use the aoc confirm command in CSG2 service configuration mode. To remove the token, use the no form of this command.

aoc confirm token

no aoc confirm

Syntax Description	token	A string of up to 15 alphanumeric characters. The string is not case-sensitive.
		Acceptable characters include alphanumeric characters and any of the following
		special characters: $-_.+!*'(),?/:@&=;~%. To enter other special characters not listed,
		use the URL-escape format with the percent sign (%).
		To insert a question mark (?) in the string, press Ctrl-v and then press the question
		mark (?) key. To insert a question mark in an editing document, use ASCII code 22.
		To retain the question mark, use TFTP instead of copy-and-paste.
Defaults	None
Command Modes	CSG2 service configuration
Command History	Release	Modification
	12.4(11)MD This command was migrated from CSG1.
		Changes from CSG1:
		• The name of this command changed from aoc confirmation to aoc confirm.
		• The configuration mode for this command changed from CSG user group
		configuration to CSG2 service configuration.
		• The list of supported special characters changed.
	Before configuring this command, you must enable AoC by configuring the aoc enable command.
Usage Guidelines

URL-rewriting allows a top-off server to append parameters to a URL in order to convey state information to the quota server during a Content Authorization Request. Whenever a Content Authorization Response contains the forward action code, and the URL contains the AoC confirmation token, the token and all trailing characters are removed from the URL before the request is forwarded to the server.

The token is used for HTTP and WAP 1.x content authorization URL-rewriting.

If the token uses the URL-escape format, the redirect URL to which the token is being matched must also use the URL-escape format.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-10	OL-15491-01