Appendix A CSG2 Command Reference

snmp-server enable traps csg

snmp-server enable traps csg

To enable Simple Network Management Protocol (SNMP) notification types that are available on the CSG2, use the snmp-server enable traps csg command in global configuration mode. To disable CSG2 notifications, use the no form of this command.

snmp-server enable traps csg [bma [records state] database quota-server [records state]]

no snmp-server enable traps csg [bma [records state] database quota-server [records state]]

Syntax Description

 

bma

(Optional) Enables traps for only the Billing Mediation Agents (BMAs) to which

 

 

 

the CSG2 sends billing records.

 

 

 

 

 

 

 

records

(Optional) Enables only lost records traps for the BMAs.

 

 

 

 

 

 

 

state

(Optional) Enables only state change traps for the BMAs.

 

 

 

 

 

 

 

database

(Optional) Enables traps for only the database server that answers CSG2 user ID

 

 

 

queries.

 

 

 

 

 

 

 

quota-server

(Optional) Enables traps for only the CSG2 quota servers.

 

 

 

 

 

 

 

records

(Optional) Enables only lost records traps for the quota servers.

 

 

 

 

 

 

 

state

(Optional) Enables only state change traps for the quota servers.

 

 

 

 

 

 

If you do not enter the snmp-server enable traps csg command, no CSG2 notifications controlled by

Command Default

 

 

 

this command are sent.

 

 

 

 

Command Modes

 

Global configuration

 

 

 

 

 

Command History

 

Release

Modification

 

 

 

 

 

 

 

12.4(11)MD This command was migrated from CSG1.

 

 

 

Changes from CSG1:

 

 

 

The bma, database, quota-server, records, and state keywords were added.

 

 

 

The agent, database, and quota-serverkeywords were removed.

 

 

 

 

 

 

Entering the snmp-server enable traps csg command enables all CSG2 SNMP traps.

Usage Guidelines

 

 

 

If you then enter the snmp-server enable traps csg bma command, the BMA lost records and state

 

 

change traps are enabled.

If you then enter the snmp-server enable traps csg quota-server records command, the quota server lost records trap is enabled.

 

Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide

A-248

OL-15491-01

Page 248
Image 248
Cisco Systems OL-15491-01 appendix Snmp-server enable traps csg, Records, State, 248