Cisco Systems OL-15491-01 appendix Ip csg radius pod attribute, Vsa, 3gpp, 126

Appendix A CSG2 Command Reference

ip csg radius pod attribute

ip csg radius pod attribute

To specify the RADIUS attributes and vendor-specific attribute (VSA) subattributes to be copied from the RADIUS Start message and sent to the Network Access Server (NAS) in the Packet of Disconnect (PoD) message, use the ip csg radius pod attribute command in global configuration mode. To disable this feature, use the no form of this command.

ip csg radius pod attribute {radius-attribute-numbervsa {vendor-id3gpp} radius-subattribute-number}

no ip csg radius pod attribute {radius-attribute-numbervsa {vendor-id3gpp} radius-subattribute-number}

Syntax Description	radius-attribute-number		RADIUS attribute number to be copied from the RADIUS Start
			message and sent to the Network Access Server (NAS) in the Packet of
			Disconnect (PoD) message. The range is from 1 to 255.
	vsa		Specifies the VSA.
	vendor-id		Specifies the vendor ID number. The range is from 1 to 16777215.
	3gpp		Specifies the Third Generation Partnership Project (3GPP) vendor ID.
	radius-subattribute-number		Specifies the subattribute number. The range is from 1 to 255.
Defaults	RADIUS attributes sufficient to identify the NAS and subscriber (RFC3576) are sent in the PoD
	message.
Command Modes	Global configuration
Command History	Release	Modification

12.4(11)MD This command was migrated from CSG1. Changes from CSG1:

•The name of this command changed from radius pod attribute to ip csg radius pod attribute.

•The configuration mode for this command changed from CSG user group configuration to global configuration.

•The 26 keyword was removed.

Usage Guidelines You can specify up to 256 RADIUS attributes.

If the RADIUS message does not contain an attribute, the PoD message attribute does not contain the attribute, either.

The CSG2 saves and reports attribute and subattribute information for each subscriber.

When the CSG2 receives a new RADIUS Accounting Start or RADIUS Interim Accounting Request, it saves the attribute and subattribute information parsed from the new request.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-126	OL-15491-01