Cisco Systems OL-15491-01 appendix Records intermediate, Bytes bytes, Seconds seconds, 220

Appendix A CSG2 Command Reference

records intermediate

records intermediate

To enable the generation of CSG2 intermediate billing records, use the records intermediate command in CSG2 content configuration mode. To disable the generation of intermediate billing records, use the no form of this command.

records intermediate {bytes bytes seconds seconds bytes bytes seconds seconds}

no records intermediate {bytes bytes seconds seconds bytes bytes seconds seconds}

Syntax Description

Defaults

bytes bytes	Number of bytes of data, sent and received by a session, that triggers the sending of
	an intermediate billing record:
	The difference between bytes sent and received in two records might not exactly
	equal the bytes argument. A trigger can occur only on a packet boundary. Once
	triggered, a separate process captures a snapshot of the current byte counts for a
	session. Between the trigger and the snapshot, additional packets might be counted.
	The range is from 5000 to 4294967295. The default value, if the bytes keyword is
	not specified, is 0, indicating that the number of bytes sent and received will not
	trigger an intermediate record.
seconds seconds	Maximum time, in seconds, between billing records for a session. Records can be
	sent more frequently if the number of bytes is reached.
	When a record is sent because the maximum time has been reached, the byte counts
	reported in the record are approximate.
	The range is from 5 to 86400. The default value, if the seconds keyword is not
	specified, is 0, indicating no time limit.

If you do not specify the records intermediate command, or if you specify the records intermediate command for a content for a protocol handler that does not support intermediate statistics, intermediate billing records are not generated.

If you specify the bytes keyword but not the seconds keyword, the maximum time between billing records for a session is set to 0 seconds, indicating no time limit.

If you specify the seconds keyword but not the bytes keyword, the number of bytes of data that triggers the sending of an intermediate billing record is set to 0 bytes, indicating no maximum.

If you specify both the bytes keyword and the seconds keyword, a billing record is sent when either limit is reached. Then both limits are reset.

Command Modes CSG2 content configuration

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-220	OL-15491-01