Aiwa VX-S137U, VX-S207U manual Watching a TV program, Setting the sleep timer, To turn off the TV

BASIC OPERATIONS

Watching a TV program

TV VCR/CATV

POWER

	SLEEP
Number	PREV.CH
buttons

MUTING
VOLUME +/–	CHANNEL
	N/M

			VX-S207
Headphones jack	VOLUME		POWER
POWER	+/–	CHANNEL
		N/M
indicator

1 Press POWER to turn on the unit.

The POWER indicator on the front lights.

2 Press CHANNEL N or M repeatedly, or the number buttons to select the channel number.

To select CATV broadcast using the number buttons

Set the TV VCR/CATV selector to CATV. When selecting the number between 10 and 19, press 0 once to enter the hundreds digit, and then press the buttons 1 through 9 to enter tens and ones digits. When selecting the numbers less than 10, press 0 twice to enter the hundreds and tens digits, and then press the buttons 1 through 9 to enter the ones digit.

To select VHF/UHF broadcast using the number buttons

When selecting the numbers less than 10, press 0 to enter the tens digits, and then press the buttons 1 through 9 to enter the ones digit.

3 Press VOLUME + or – to adjust the volume.

To turn off the TV

Press POWER.

To mute the volume

Press MUTING. To restore the volume, press MUTING, VOLUME + or –.

To recall a previous channel

Press PREV.CH to switch back and forth between the current channel number and the previous one.

Tip

To listen through the headphones, insert headphones (not supplied) with a stereo mini plug into the headphones jack on the front. The sound from the TV speaker is muted.

Note

The power automatically turns off approximately 15 minutes after a television station has stopped broadcasting.

Setting the sleep timer

Press SLEEP repeatedly to select the number of minutes after which to turn off.

The minutes change in 10-minute intervals, down from 120 minutes. After the set amount of time has elapsed, the unit turns the power off.

0 10 ••••• 100 110 120

SLEEP 1 2 0

To check the remaining sleep time

Press SLEEP once. The remaining time appears on the screen.

To cancel the sleep timer

Press SLEEP repeatedly until “SLEEP 0” appears.

13 ENGLISH