Setting the
5 Press SET/TRACKING + or – to set the hours, then press ENTER.
6 Press SET/TRACKING + or – to set the minutes, then press ENTER.
To change the minutes setting in ten minutes, press and hold SET/TRACKING + or
7 Press SET/TRACKING + or – to display SET, then press ENTER.
8 Press MENU 3 times to return to the normal screen.
The unit automatically turns off at the programmed time.
To correct the data while setting
Before pressing ENTER in step 7, press CANCEL repeatedly until the item you want to correct flashes. Reset the data using the SET/TRACKING + or – button.
Tips
•To cancel the
•To confirm the setting, follow the step 1 through 3. Press MENU 3 times to return to the normal screen.
•Do not set the
19 ENGLISH
PLAYBACK
Playing back a tape
zEJECT
TV MONITOR
dPLAY |
fREW/[ | gF FWD/] |
sSTOP | aPAUSE/STILL |
SET/TRACKING |
|
+/– |
|
SLOW | ATR |
| |
DPLAY | ZSTOP/EJECT |
fREW/[ gF FWD/] | |
1 Insert a cassette. |
|
•The power turns on automatically.
•Playback starts immediately if the erasure prevention tab has been removed from the cassette.
2 Press d PLAY to start playback.
“D” of the button on the unit lights.
To stop playback
Press s STOP on the remote control or Z STOP/ EJECT on the unit.
“D” of the button on the unit lights off.
Notes
•When the tape reaches the end during playback, slow playback,
•The unit selects the tape speed, SP, LP or SLP (EP).
•The power is turned on and playback is started when d PLAY is pressed during power off.
•Without high quality resolution on the picture, it is available to use