Setting the channels
Before Auto Channel Memory, this unit can receive all channels in your area by pressing the CHANNEL N or M button repeatedly. After Auto Channel Memory, you can skip the channels which are not preset with the CHANNEL N or M button.
TV VCR/CATV
Number buttons
MENU | ENTER |
SET/TRACKING 
+/–
Before starting
•Make sure the unit is in TV mode.
•Set the TV VCR/CATV selector to TV VCR.
1
2 Press SET/TRACKING + or – to select CH SET- UP, then press ENTER.
3 Press ENTER to select TV or CATV.
TV : the program from VHF/UHF antenna
CATV : the CATV according to the connections to the antenna connector
5 Press MENU twice to return to the normal screen.
Tip
To interrupt the Auto Channel Memory, press MENU.
Note
Once you conduct the Auto Channel Memory, the previous settings will be canceled.
Adding or erasing the channels manually
If the Auto Channel Memory does not set the channels correctly, add them manually for watching TV programs. Also, you can erase the unnecessary channels.
1 Press MENU.
2 Press SET/TRACKING + or – to select CH
3 Press SET/TRACKING + or – to select ADD/DELETE, then press ENTER.
4 Press SET/TRACKING + or – to select the channel number to be erased or added.
•You can also select the channel using the number buttons. When selecting the numbers less then 10, press 0 to enter the tens digit, then press the button 1 through 9 to enter the ones digit.
•When the selected channel is already set, ADD appears in green. When it is not set, DEL appears in red.
4 Press SET/TRACKING + or – to select AUTO CH MEMORY, then press ENTER.
All available channels in your area are scanned and stored in the memory of the unit.
After scanning, CH
5
6
7
Press ENTER to erase or add a selected channel.
If you want to add or erase another channel, repeat steps 4 and 5.
Press MENU 3 times to return to the normal screen.
