Aiwa VX-S207U, VX-S137U manual Connecting the antenna, Basic connections, Preparation, Continue

PREPARATION

Connecting the antenna

Basic connections

o

VX-S207

UHF/

VHF

AC cord hook

75-ohm coaxial cable (not supplied)

1

2 To AC outlet

300-ohm twin-lead cable (not supplied)

Antenna adaptor (supplied)

1 Connect the antenna cable to the UHF/VHF connector on the unit.

If the cable is a round-type 75-ohm coaxial cable, connect it directly to the UHF/VHF connector.

If the cable is a flat-type 300-ohm twin-lead cable, connect it to the antenna adaptor (supplied), and connect the adaptor to the UHF/VHF connector.

When you use VX-S137U, the antenna adaptor can be taken out from the supplied telescopic antenna.

2 Connect the AC cord to the AC wall outlet after passing it through the AC cord hook.

To use the security hook for safety (VX-S207 only)

To prevent the unit from falling during earthquakes, etc., affix the unit to a wall or pillar with the security hook on the rear using the strong twine or wire.

VX-S207

Security hook

UHF/

VHF

CONTINUE

ENGLISH 4