Changing the setting, To cancel a program, Press ENTER, Tips

3 Press SET/TRACKING + or – to select ONCE, DAILY or WEEKLY.

To record	Select
a single program	ONCE
daily program	DAILY

weekly program such as every	WEEKLY
Monday (WKL-MON)

4 Press ENTER.

•The following timer information appears on the screen.

•If you want to change the setting here, see “Changing the setting.”

To cancel a program

Press MENU. And press SET/TRACKING + or – to select TIMER REC SET in the menu. Then press SET/TRACKING + or – to select the unnecessary program, and press CANCEL.

If the program overlaps another

The overlapped portions will be deleted. The program listed first on the timer program setting screen has priority over the succeeding program as illustrated.

5 Press ENTER repeatedly until the tape speed flashes, then press SET/TRACKING + or – to select SP, LP or SLP.

6 Press VCR PLUS+ button or ENTER.

The timer program list appears.

7 Press MENU twice to return to the normal screen.

8 Press T-REC.

•The TIMER REC indicator on the unit lights, and the unit stands by for timer recording.

•If the TIMER REC indicator does not light, a cassette is not inserted.

•The cassette is ejected if the cassette’s erasure prevention tab has been removed.

•You can turn the unit off. The unit automatically starts recording at the programmed time.

Caution

When the TIMER REC indicator on the unit lights, the tape functions are not operable. To operate the others, press T-REC. However, remember to press it again to activate timer recordings.

To cancel the On-Timer or Off-Timer

To avoid having the On-Timer or Off-Timer working during the program time, press the VCR PLUS+ button after step

6.The ON/OFF TIMER menu will appear on the screen. Then refer to “Setting the On-Timer” or “Setting the Off- Timer.”

Tips

•If “PROGRAM FULL” flashes and the timer program list on step 1, 8 programs are already set. Cancel an unnecessary program.

•To confirm the setting, select TIMER REC SET in the menu to display the timer program list. Press MENU twice to return to the normal screen.

•When the power supply is interrupted for more than 5 seconds, the preset program is cleared. In this case, you have to set the clock and the timer again.

Note

During timer recording, when the tape reaches the end, the TIMER REC indicator on the unit flashes.