Trouble indications
The indicator lights inform you of internal abnormalities.
LED indicators | State/Problems | |
|
| |
| No power | |
No LED lit | ⇒ Problem with projector | |
• Unplug the power cord, and contact your dealer. | ||
| ⇒ The lamp cover is not properly attached. | |
| • Unplug the power cord, and reattach the lamp cover. | |
| Power went out during use | |
| ⇒ Internal overheating, or the outside temperature is too high. | |
| • Place the projector so that the air intake and exhaust are not | |
Red LED is fl ashing at ON/ | blocked. | |
• Unplug the power cord and wait for a short while, then turn | ||
STANDBY indicator (2Hz) | ||
the power back on. | ||
| ||
| ❈ The icon will appear before the power goes out. | |
| ❈ After approx. one minute of abnormal display, the projector | |
| returns to the standby state waiting for internal cool down. | |
| Power went out during use | |
Red LED is fl ashing at ON/ | ⇒ Problem with internal cooling fan. | |
• Unplug the power cord, and contact your dealer. | ||
STANDBY indicator (5Hz) | ❈ The icon will appear before the power goes out. | |
| ❈ After approx. one minute of abnormal display, the projector | |
| returns to the standby state waiting for internal cool down. | |
| Power went out during use, or won’t come on | |
| ⇒ Lamp temperature is high so that it is diffi cult to turn on, | |
| the lifetime of the lamp has ended or the projector is | |
Red LED lit at ON/STAND- | malfunctioning. | |
• Unplug the power cord and wait for a short while, then turn | ||
BY indicator | ||
the power back on. | ||
| ||
| • If a lamp burns out, replace it with a new one. | |
| ❈ After approx. one minute of abnormal display, the projector | |
| returns to the standby state waiting for internal cool down. |
Others
53