Turning the power on and off
■Connecting the power cord
1Insert the power cord connector into the AC IN socket of the projector.
2Insert the power cord plug into a wall or other power outlet.
■Turning the power on
1Turn on the main power switch.
The blue LED at the ON/STANDBY key will start to fl ash, indicating standby mode.
2Activate the projector.
The projector can be activated by pressing the ON/STANDBY key on control panel for 3~5 seconds and releasing while the red LED is still lit. The projector is only activated by the ON/STANDBY key while the red LED is lit to prevent unwanted starting of the projector. When started all the blue LED on the control panel will light up and the
The projector can be activated by remote con- trol, too. In this case, it is no need to press the ON/STANDBY key for 3~5 seconds.
Power cord connector
WARNING
•Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes or sight.
•Do not block the air intake or exhaust. Doing so could cause a fi re due to internal overheating.
•Do not place your hands, face, or any other objects near the air exhaust. Doing so could cause injury or could deform or break the object.
•Turn off AC switch before plugging out power cable.
26