■Using standby mode to save power and turning the power off
1Put the Projector into standby mode to save power.
Pressing the ON/STANDBY button once, a power off indication message will appear. Press the ON/STANDBY button to put the projector into standby mode. The power off message has to be displayed for the second press of the power button to be valid.
When cooling lamp | After cooling complete |
A | Blue: on | B | Blue: blink |
AThe cooling fan will operate for about 60 seconds. In this state the power cannot be turned back on.
BIn Standby mode. The ON/STANDBY indicator (Blue LED) is fl ashing.
2Press power switch to turn the power off.
Press the main power switch on the terminal panel to turn off the projector.
■Note
•The projector consumes about 4W of power in standby mode. We recommend that you unplug the power cord or turn off the main power switch if you will not be using the projector for an extended period.
■PRECAUTION
•If the power cord is unplugged before cooling is complete, give the lamp time (about 5 minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light.
Operations
27