Changing the Backlight Time Length

Select how long the main screen and keypad remain backlit after any keypress is made.

Press > Settings > Display > Backlight > Backlight Dim or Backlight Off.

If you select Backlight Dim, select Always Bright, Always Dim, or a preset length of time to elapse before the screen backlight dims.

If you select Backlight Off, select a preset length of time to elapse before the screen and keypad backlights turn off. (When you select Always Bright for the Backlight Dim setting above, the keypad backlight will turn off after about one minute.)

Note

Long backlight settings reduce the battery’s talk and

 

standby times.

 

 

Selecting a Picture ID

You can select an image as a picture ID.

1.Press > Settings > Display > Picture ID.

2.Select Contacts, Unsaved Numbers, or Private / Unknown.

28 2B. Settings

If you select Contacts, select All Contacts, or select One Contact and then select an entry.

3.Select a picture ID option by pressing the navigation key up or down, and then select an image.

If you select Take New Picture, press to take a picture.

4.If you are satisfied with the image on the preview screen, press .

Power Save Mode

This feature helps conserve your battery power by automatically adjusting settings for certain phone features.

1.Press > Settings > Display > Power Save Mode.

2.Select On. (Select Off to deactivate this feature.)

3.Read the message and press CONTINUE (left softkey).

Changing the Clock/Calendar Display

Choose which design of clock or calendar you want to display in standby mode.

1.Press > Settings > Display > Clock/Calendar.

2.Highlight a display option and press .

Page 38
Image 38
Sanyo PLS-3810 manual Changing the Backlight Time Length, Selecting a Picture ID, Power Save Mode, 28 2B. Settings