Sanyo PLS-3810 End-of-Call Options, Saving a Phone Number,  Press to call a highlighted entry

End-of-Call Options

After you have finished your call, the phone will display an end-of- call message. “Call ended” and the duration of the call will alternately flash beneath the caller’s name (if already in your Contacts) or the caller’s number (if available). Press any key below to select an option; press any other key to stop the end-of-call display.

Press to call a highlighted entry.

Press to display all history for a highlighted entry.

Press OPTIONS (right softkey) to display the Recent History options. (See “History Options” on page 44 for details.)

Press SEND MESSAGE (left softkey) to send a text or picture message.

Press to return to standby mode.

Press or simply wait 10 seconds to return to where you were before the call (if applicable).

If you press a key other than one of those above, the Recent History screen is displayed. (See “Viewing History” on page 43.)

Saving a Phone Number

Your phone can store up to 300 Contacts entries and each entry can contain up to seven phone numbers. (See section 2D, “Contacts,” on page 47.)

1.From standby mode, enter a phone number and press OPTIONS (right softkey) > Save. (If this is the first time you are saving an entry to Contacts, skip to step 3.)

2.Select New Entry or Existing Entry.

3.If you chose New Entry, select a number type, and then enter the new entry name.

– or –

If you chose Existing Entry, select an entry to which you want to save the number, and then highlight a number type and press .

4.Press DONE (left softkey) to save the entry.

18 2A. Phone Basics