1A. Setting Up Service

Setting Up Your Phone (page 2)

Activating Your Phone (page 3)

Setting Up Your Voicemail (page 3)

Getting Help (page 4)

Setting Up Your Phone

1.Install the battery.

Insert the battery into the opening on the back of the

phone, making sure the connectors align ( ), and gently press it down ( ).

Position the battery cover and slide it upward until it snaps into place ( ).

21A. Setting Up Service

2.Press to turn the phone on.

If your phone is activated, it will turn on, search for service, and enter standby mode.

If your phone is not yet activated, see “Activating Your Phone” on page 3 for more information.

3.Make your first call.

Use your keypad to enter a phone number.

Press .

Note

Your phone’s battery should have enough charge for your

 

phone to turn on and find a signal, set up your voicemail,

 

and make a call. You should fully charge your battery as

 

soon as possible. See “Charging the Battery” on page 12

 

for details.

 

 

Page 12
Image 12
Sanyo PLS-3810 manual 1A. Setting Up Service, Setting Up Your Phone, Install the battery