Sanyo PLS-3810 manual Dialing From the Contacts List, Plus + Code Dialing, Speed Dialing

Dialing From the Contacts List

1.From standby mode, press CONTACTS (right softkey).

2.Highlight the entry you want to call.

3.Press to dial the entry’s default phone number.

– or –

Press the navigation key left or right to show another number for the entry and press .

Plus (+) Code Dialing

When placing international calls, use Plus Code Dialing to automatically enter the international access code for your location. (This feature is subject to network availability.)

1.Press and hold to display “+” on your phone screen.

2.Dial the country code and phone number you’re calling, and

press . The access code for international dialing will automatically be dialed, followed by the country code and phone number.

Speed Dialing

You can store up to 98 numbers in your phone’s speed dial memory to make contacting friends and family easier.

You must assign a speed dial number to the existing phone number beforehand. See “Assigning Speed Dial Numbers” on page 51.

To use speed dial for locations 2-9:

From standby mode, press and hold the appropriate key for approximately two seconds.

To use speed dial for locations 10-99:

From standby mode, press appropriate keys, and then press .

The display confirms that the number has been dialed when it shows “Connecting...”.

Note	Speed dialing may not be available when you are roaming;
	when you are roaming off the home network, you must
	always dial using 11 digits (1+ area code + number).

20 2A. Phone Basics