Toshiba TDP-ET10 Using menus Continued, Input MENU, Picture setting MENU, Video input, Brightness

Using menus (Continued)

■Input MENU

Video input source and audio input source can be selected separately in this projector.

Video input

Video input source can be selected in this menu from DVD, Component, HDMI, Video, S-video and Computer.

Press . Select with / [UP] [DOWN] key.

Audio input

Audio input source can be selected in this menu from DVD, HDMI, Digital (Coax) and Ana- log. Audio input source links to the video input source and it is memorized.

For example, after analog is selected for audio input when video input is S-video, analog will be selected automatically for audio input whenever S-video is selected for video input.

Press . Select with / [UP] [DOWN] key.

■Picture setting MENU

Picture mode

Select a picture mode. The following four modes are available for each input.

-Standard

-Dynamic

-Theater 1

-Theater 2

Press . Select with / [UP] [DOWN] key.

Brightness

Adjust the brightness of the image.

Press . Adjust with / [ - ](Darker) or / [ + ] (Brighter) key.

Contrast

Adjust the image contrast.

Press . Adjust with / [ - ] (Lower) or / [ + ] (Higher) key

Color

Adjust the color of the image.

Press . Adjust with / [ - ] (Lighter) or / [ + ] (Deeper) key.

Tint

Adjust the tint of the image color.

Press . Adjust with / [ - ] (Reddish) or / [ + ] (Greenish) key.

This can be adjusted only when video input source is Video/S-video and input signal is NTSC or NTSC4.43.

42