Using menus (Continued)
Advanced MENU
Overscan
Adjust overscan ratio of the image.
Press 
. Adjust with 
/ [ - ] (Lower) or 
/ [ + ] (Higher) key.
No overscan when set to 100%
NTSC mode
Set the black level for
Press 
. Select US(7.5IRE)/Japan(0IRE) with 
/ [UP] [DOWN] key.
This can be adjusted only when video input source is
HDMI mode
Set the black/white level for HDMI input.
Press 
. Select HDMI/DVI with 
/ [UP] [DOWN] key.
This can be adjusted when input source is HDMI.
Frequency
Adjust the sampling frequency to eliminate periodic patterns and fl ickering when many vertical lines appear on the screen.
Press 
. Adjust with 
/ [ - ] or 
/ [ + ] key.
This can be adjusted when input source is Computer.
Phase
Adjust the sampling phase to eliminate fl icker.
Press 
. Adjust with 
/ [ - ] or 
/ [ + ] key.
This can be adjusted when input source is Computer.
MPEG NR
Adjust the detail of noise reduction. Mpeg noise reduction level.
Press 
. Adjust with 
/ [ - ] (Lower) or 
/ [ + ] (Higher) key.
Reset
Reset Advanced picture setting MENU adjustments and settings to factory default. Press 
. Confi rmation window will appear and select [Yes] with 
/ [ - ] or 
/ [ + ] key and press 
to reset.
44
