Toshiba TDP-ET10 To start playback in the stop mode, To pause playback still mode, Operations

■Notes

Strong static electricity may affect the DVD player’s operation and cause it not to work properly. If this happens, please try followings.

(1)Press /key for about 5 seconds. DVD player will eject the disc.

(2)If DVD player still don’t work, turn OFF the POWER, disconnect and then reconnect the AC power cord, and turn ON the projector again.

To start playback in the stop mode:

Press/ or

To pause playback (still mode):

Press / or during playback.

To resume normal playback, press / or .

•The sound is muted during still mode.

•If is pressed during pause, DVD plays frame by frame .

To stop playback:

Press / or

To remove the disc:

(1)Press / during stop or .

(2)Remove the disc after the disc comes out.

■Notes

•If a non-compatible disc is loaded, “WRONG REGION” will appear according to the type of loaded disc. In this case, check your disc again.

•Some discs may take a minute or so to start playback.

•If you insert a single-sided disc the wrong way, “READ” will appear on the display for about 20-40 seconds. Then “NO DISC” will display and the disc will be ejected automatically.

•Some playback operations of DVDs may be intentionally fi xed by software producers. Since this projector plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

•Do not move the projector during playback. Doing so may damage the disc. If you want to move the projector to other place or room, be sure to eject the disc and turn off the power beforehand.

•If the disc is not loaded even if the disc is inserted into the DVD disc slot, remove the disc once and try to load the disc again.

•Do not put any objects other than discs in the disc slot. Doing so may cause the projector to malfunction.

•When you press a button, there may be a slight delay before the function activates.

Operations

35