Vertical Communications EP100 manual Setting a Personal Ringing Tone, Setting Volume Levels

Overview

1.4 Setting a Personal Ringing Tone

You can choose one of many different ring tones for your telephone. Often, when several telephones are located close together, each user chooses a different personal ring tone.

To select one of the ring tones, proceed as follows:

1.Select OPTIONS.

2.Select NEXT until the RING option appears.

3.Select RING.

4.Select UP or DOWN to choose ring tone in display (a new tone

sounds each time you press the	Selecting the Ring Tone
button).

5.Press SPEAKER to end.

1.5Setting Volume Levels

The volume control on your telephone is a multipurpose control you can use to set the volume (loudness) of the ringer, the speaker, and the handset.

To set the ringer loudness level, while your telephone is on-hook and idle, press the VOLUME Up or VOLUME Down button once for each change in loudness you desire. The ringer sounds once for each change as an example of the current setting.

Note: If you set the ringer to the OFF position, your telephone sounds a short ring burst once for each call you receive at your station.

To set the speaker and handset loudness levels,

1.Press INTERCOM button.

2.Press the VOLUME Up or VOLUME Down button once for each change in speaker volume that you desire.

24 Comdial Sept ‘04