
CONVERSip EP100 User
7.10 Default Volume Control
You can set a permanent loudness level for any volume control setting. The level will remain at this volume (referred to as the default setting) until you change the setting.
To set a permanent speaker, headset, handset, or group listening loudness for all future calls,
1.Press INTERCOM.
2.Activate speaker, headset, handset, or group listen mode to be affected.
3.While in that mode, press VOLUME Up or VOLUME Down button to adjust loudness.
4.Dial **7 or press programmed SAVE button to hold the loud- ness at the last setting for all future calls (until you change the default again).
5.Repeat this procedure in each mode until you’ve set all default volume levels.
7.11 Programmed Button Display
7.11.1BUTTON FUNCTIONS DISPLAY (BUTTON QUERY)
You can cause the display to identify the function of each button on your telephone.
Sept ‘04 | Comdial | 93 |