Making Calls

3.2 Making Intercom Calls

There are two methods for making an intercom call. One causes the called telephone to ring (tone-first). The other causes your voice to sound out at the called telephone (voice-first). Your installer can set the system to deliver either tone-first or voice-first calling.

Note: The following instructions assume a tone-first setting. You can change a call to voice announce signaling for that call simply by pressing the INTERCOM button again after dialing the extension number or by pressing the DSS/BLF button again.

To manually cause the other telephone to ring (tone calling),

Ext 321 J Doe

1.Press INTERCOM.

2.Dial extension number (called telephone will ring).

To tone call automatically, press DSS/ BLF button (called telephone will ring).

Press Intercom to Display Extension Number

Note: The following instructions assume a voice-first default setting. Any user can change a call to a tone signaling for that call simply by pressing the INTERCOM button again after dialing the extension number or by pressing the DSS/BLF button again.

To voice announce manually,

1.

Press INTERCOM.

Calling J Smith

 

2.

Dial extension number.

CALLBK

MSG

 

 

3.Speak your announcement. To voice announce automatically,

1. Press DSS/BLF button.

Ringing Intercom

2. Speak your announcement.

40

Comdial

Sept ‘04

Page 38
Image 38
Vertical Communications EP100 manual Making Intercom Calls