Other Advanced Features
Note: The AUTOMATIC REDIAL button described in the following steps must have already been programmed by your system installer or attendant. You cannot program this feature yourself.
To use the automatic redial feature to redial a busy or unanswered number,
1.While on the call, select ARDL or press the AUTOMATIC
REDIAL button programmed by | L123 | |
CONF ARDL | ||
your installer. | ||
|
2.The system repeatedly dials the number until you cancel the fea-
ture, or until the system has dialed the number a prepro-
grammed number of times (determined by your system installer).
3.The AUTOMATIC REDIAL light flashes between redials and turns on steady during redialing.
4.If your installer has enabled answer supervision on your line, the system automatically cancels automatic redialing and turns the AUTOMATIC REDIAL light off.
5.If answer supervision is not enabled, select ARDL or the pro- grammed AUTOMATIC REDIAL button while on the call to cancel automatic redialing.
6.If your system installer has enabled the redial multiple num- bers feature, you can have up to 10 numbers in your redial queue. To add numbers to your redial queue, repeat step 1.
To scroll through numbers in your redial queue if your telephone is currently idle,
1.Select ARDL or the programmed AUTOMATIC REDIAL but- ton. The display shows the last number dialed.
2.Choose one of the following:
•Select REMOVE to remove the number from the redial queue.
84 | Comdial | Sept ‘04 |
