CONVERSip EP100 User
2. Press TAP to retrieve the displayed parked call.
If you receive a parked call message on your Tracker pager,
1.Go to any system station.
2.Press INTERCOM.
3.Dial Tracker pager orbit code (#800 to #899).
4.Retrieve call.
To enable or disable a Tracker pager at your station,
1.Press INTERCOM.
2.Dial #07 to enable, or dial #06 to disable.
3.Press SPEAKER to end.
7.6Auxiliary Jack
Your EP100 may be equipped with an auxiliary jack that provides an interface for a headset, a tape recorder, an external ringer, or an exter- nal pager. If your EP100 is so equipped, you must set up one of its programmable buttons to serve as an enable/disable button for each auxiliary device you plan to connect. The system activates only the device that it identifies in the display, and activates only one device at any time.
Connectors on Bottom of Telephone
Line Cord
Auxiliary Jack
Auxiliary Handset
Handset
Jack
Auxiliary Jack Location
The following modes are programmable with the auxiliary jack:
•The headset mode allows you to operate your telephone with a headset instead of as a speakerphone or with the handset.
Sept ‘04 | Comdial | 87 |
