CONVERSip EP100 User

2.Press programmed SAVE NUMBER REDIAL button (system automatically dials the number that you saved earlier).

3.5Camping On - Busy Station, Automatic Callback

If you call another station and receive a busy signal or a Do Not Disturb tone, you can press a button that will cause the system to ring your telephone when the station is available.

To camp on at any busy station,

1.Select CAMP.

2.Your telephone immediately hangs up. When the station you called becomes available, your telephone rings with five short tone bursts.

J Doe Ext 321 Is Busy

SOHVA CAMP NEXT

When you hear five short tone bursts,

Camping On Selection

press INTERCOM or select ANS. The

 

other telephone starts ringing.

 

Note: If you do not press INTERCOM after the ring back tones within the time limit set by the installer, the call back is canceled.

To cancel the call back before your telephone sounds the tone bursts, press INTERCOM and dial #6.

To camp on at a station with a Do Not Disturb condition set, select CAMP. A call back occurs when the called station is no longer set in the Do Not Disturb mode.

Sept ‘04

Comdial

43

Page 41
Image 41
Vertical Communications EP100 manual Camping On Busy Station, Automatic Callback