CONVERSip EP100 User
To disable an auxiliary mode, select enable/disable button. The light associated with button turns off and the display no longer denotes the feature.
CAUTION
With the exception of a headset micro-
phone, do not connect the audio output of
any external device to the auxiliary jack. Also, do not connect the tip and ring leads of a telephone line to the auxiliary jack. Do not connect any devices to the auxiliary jack other than those mentioned above.
7.7 Account Codes
If the installer has arranged your system for account code entry, your display may prompt you to enter an account code after answering a call.
To enter account code on an incoming call,
1.If available, press programmed ACCOUNT CODE button (the call in progress is not interrupted).
2.If not available, press INTERCOM and dial *04 (call is auto- matically placed on hold).
3.Dial the account code. Your telephone automatically returns to the call after you’ve dialed the complete account code.
If the installer has arranged your system for account code entry, your display may prompt you to enter an account code before dialing. Depending upon how the installer has programmed your system, these account codes may be “forced”(mandatory) for dialing outside numbers
To enter account code on an outgoing call,
1.Dial 9 or other line button (the display prompts for an account code if programmed to do so).
Sept ‘04 | Comdial | 89 |
