Vertical Communications EP100 manual Response Message Delivery

Nonverbal Messaging

3.Dial extension number or press DSS/BLF button of station that was alerted. The message-waiting light of called station turns off.

To turn off the message-waiting light during message-delivering con- versation, press INTERCOM once if off-hook, twice if on-hook.

To receive a message at an alerted station,

1.Observe flashing message wait- ing light and the LCD message indicating who called for you.

2.Select CALL to dial the messag- ing station automatically.

3.Select CLEAR to clear the mes- sage from your station.

Call J Doe

CALL CLEAR

Receiving a Message

5.3 Response Message Delivery

By programming one or more RESPONSE MESSAGE buttons on your EP100, you can respond with a variety of messages to many calling situations. A scrolling RESPONSE MESSAGE button allows the sender to select from several different messages which have been programmed by the system attendant. A fixed RESPONSE MESSAGE button sends the same message you previously select each time it is pressed. (See Section 6.4, LCD Feature Buttons for instructions on programming a dedicated RESPONSE MESSAGE button.)

To send an LCD message when you call and receive busy signal or no answer,

1.While still on the call, press the appropriate RESPONSE MES- SAGE button to send a preselected message to the other tele- phone,

68 Comdial Sept ‘04