Dish Network DVR-7000 manual To SET a Timer

EchoStar International Corporation	All rights reserved
© 2002

Operation Section 5

3.1. TO SET A TIMER

CAUTION

Note that the VCR timer does not start or program your video recorder (VCR). You have to set the timer of your VCR also to the same time as on the receiver. Please refer to the user’s guide of your VCR how to record from a satellite receiver. On quite a lot of VCRs you have to select the so called external channel (E1)

1.On the RCU, press the EPG key.

2.If EPG data is available, select a program in the future (right of the red line in the EPG window);

3.If no EPG data is available, select the correct channel.

4.Read the available help text for information.

5.On the RCU press the YELLOW key.

6.Select the required timer.

7.When the timer appears, if necessary:

8.Change the date:

a. use the key, to go to the Date;

b.read the available help text for information;

c.press the OK key to change the date;

d.in the calendar, select the required date;

e.press the OK key to return to the timer.

NOTE

Be aware that the shown EPG start/stop time might not be the same as the actual start/stop times, because of last minute program changes.

9. Change the start time:

a. use the key, to go to the Start Time;

b. read the available help text for information;

c. press the keys to set the hours;

d. press the OK key to go to the minutes;

e. press the keys to set the minutes.

10. Change the stop time:

a. use the key, to go to the Stop Time;

b. read the available help text for information;

c. press the keys to set the hours;

d. press the OK key to go to the minutes;

e. press the keys to set the minutes.

5

Digital Satellite Receiver Page 5 - 11