Dish Network DVR-7000 manual Timers

EchoStar International Corporation	All rights reserved
© 2002

Familiarization Section 4

4.1. THE TIMERS

The event timers are a kind of alarm clock. An event
timer reminds you when a timed program or recording
starts. You can set the next timers:
■ DVR timer, to automatically record a program onto
the hard disk.
■ VCR timer, to automatically switch over to the
timed program before it really starts. This allows
you to record a program on a video tape (video
recorder);
■ Reserved timer, to automatically switch over to the
timed program before it really starts or when the
receiver is in standby, to switch on the receiver.
If a timer is set on a program that is shown in the EPG,
the relevant data is already shown in the timer. You
can change the settings as follows:
■ Date, to set the start date for the timer;
■ Start time, to set the start time in hours/minutes;
■ Stop time, to set stop time in hours/minutes;
■ Period, to set the timer once or repeat for every	4
occurrence;

■Favorite list, to select a list where to save the recording (none saves into the all files list).

■Parental lock, to lock or hide the recording automatically.

■Status, to set (active) or delete (inactive) the timer.

■Store settings, to program the timer.

Timers are shown in the EPG window as clocks.

In the List-Timers page, it is possible to get a list of the timers that are set. In this page you also can change or delete a set timer.

You can view an overview of all the timers that are set if you select the timers list.

Digital Satellite Receiver Page 4 - 17