Dish Network DVR-7000 manual Local Time, TV System

EchoStar International Corporation	All rights reserved
© 2002

Familiarization Section 4

TO CHANGE THE PIN CODE

This menu page allows you to change the PIN code, you can change:

■Old password

To type in the factory default or personal PIN code.

■New password

To type in your new PIN code (numbers only).

■Verify password

To type in your New password again. Now the receivers verifies the new password to make sure that you typed in the new password correctly.

2.1.4. LOCAL TIME PAGE

This menu page allows you to customize the local time settings. For the correct operation of
the EPG and the timers, it is necessary to set the local time correctly. You can customize:
■	Selected time zone
	To set the time zone where you are.
■	Year
	To set the actual year.
■	Month	4
	To set the actual month.
■	Date
	To set the actual date.
■	Day
	To set the actual day.
■	Hour
	To set the actual time in hours.
■	Minute
	To set the actual time in minutes.

■ Press OK to set the time

To confirm the settings you made.

2.1.5.TV SYSTEM PAGE

This menu page allows you to customize the TV settings used for the receiver, you can customize:

■Channel

To select the (UHF) TV channel to which the receiver is connected.

■CH Frequency

To view the frequency that corresponds with the selected channel. You can not set this option.

■System

To set the video format supported by your TV.

Digital Satellite Receiver Page 4 - 7