Dish Network DVR-7000 manual To Change the User LNB Settings, About Echostar Receiver Information

Section 6 Maintenance

6.Wait for the Check Signal page to appear.

7.In the Check Signal menu make the required selections for transponder and search mode.

8.Read the available help text for information.

9.If the red dot in the transponder field stays:

a.select another transponder;

b.go to the check signal field;

c.on the RCU, press the OK key.

10.Go to the Search Channels field.

11.On the RCU, press the OK key.

12.Wait for the search to complete:

a.the receiver display shows a moving dot;

b.the search completed popup menu appears.

13.On the RCU, press the OK key.

.

2.2. TO CHANGE THE USER LNB SETTINGS

1.On the RCU, press: a. the MENU key;

b. the key to select the menu;

c.the OK key, to select the menu.

2.Press the OK key and make the selections.

3.Read the available help text for information.

4.Go to the Store Settings field.

5.On the RCU:

a.press the OK key to save the settings;

b.press the EXIT key to leave the menu.

2.3.ABOUT ECHOSTAR - RECEIVER INFORMATION

1.	On the RCU, press:
	a. the MENU key;
	b. the key to select the	menu;
	c. the OK key, to select the	menu.
2.	In the About EchoStar information menu you can
	look up the factory and receiver information.
3.	Read the available help text for information.

© 2002 EchoStar International Corporation All rights reserved

Page 6 - 2 EchoStar DVR-7000 Viaccess