Instructions for use

Run a Washing Cycle

Brief Instructions

A washing cycle is run in the following steps:

01. Set the correct washing program:

Set the program and temperature with the program selector

Set any additional program(s)

2.Change the spin speed if necessary / select RINSE HOLD (GEEN CENTR., SANS ESSOR.).

3.Set DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE) if necessary.

4.Open the filling door and fill with washing.

5.Close the filling door.

6.Add washing detergent/care agent.

7.Start the washing program.

After the Washing Program Ends:

Attention! If the washing cycle ended with Rinse Hold, before opening the filling door carry out PUMP (POMPEN, VIDANGE), SPIN (CEN- TRIFUG., ESSORAGE) or SHORT SPIN (KORT CENTRIFUG., ESSOR. DELI- CAT).

8.Open the filling door and remove the washing.

9.Switch off the washing machine: Set the program selector to OFF (UIT, ARRET).

18

Page 18
Image 18
AEG 70730 manual Run a Washing Cycle, Brief Instructions, After the Washing Program Ends