Instructions for use

Completion of the Washing Program

Program Sequence Display

Before the start, the program steps to be carried out are displayed by the program sequence display. Ther current program step is displayed during the washing program.

Multi-Display

The expected remaining time (in minutes) is shown up to the program end in the multi-dis- play.

3With automatic program adaptation by the controller of the washing machine (quantity of washing, type of washing, imbalance recognition, special rinse etc.), it is possible to stop or correct the counting of the remaining run time.

Changing a Washing Program

Changing or aborting a program

01. Press button START/PAUSE (START/PAUZE, MARCHE/PAUSE).

2.Turn programme knob to OFF (UIT, ARRET). The washing program is aborted.

3.If required, set a new washing program. Otherwise turn the programme knob to PUMP OUT (POMPEN, VIDANGE) and then press the button

START/PAUSE (START/PAUZE, MARCHE/PAUSE).

3The washing program can be interrupted at any time with the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) and continued by press- ing the button again. Changing the washing program is possible only after the programme knob was turned to OFF (UIT, ARRET).

25

Page 25
Image 25
AEG 70730 manual Completion of the Washing Program, Changing a Washing Program, Program Sequence Display, Multi-Display