STARTTIJDKEUZE DEPART DIFFERE
LOOPTIJD TEMPS RESTANT

Instructions for use

Change Spin Speed / Select Rinse Hold

0If necessary, change the spin speed for the final

spin / select RINSE HOLD (GEEN CENTR., SANS ESSOR.): Press the button Spin speed/RINSE HOLD (GEEN CENTR., SANS ESSOR.) as often as necessary until the display for the required spin speed (or of RINSE HOLD/GEEN CENTR., SANS ESSOR.) lights up.

If RINSE HOLD (GEEN CENTR., SANS ESSOR.) is

selected, the washing remains in the last rinsing water and is not spun.

3If you do not change the spin speed, the final spin is automatically adapted depending on the washing program:

COTTONS/LINEN

(WITTE/BONTE WAS, BLANC/COULEURS)

EASY-CARES/EASY IRON (KREUKHERSTELLEND, DEFROISSABLE/ STRIJKVRIJ, SANS REPASSAGE)

DELICATES

(FIJNE WAS, LINGE DELICAT)

WOOLLENS

(WOL, LAINE)/P (Handwash)

1000 revolutions per minute

900revolutions per minute

700revolutions per minute

900revolutions per minute

The speed of the intermediate spin depends on the selected program and cannot be changed.

Set the Delay Timer/Soaking Duration

Delay Timer

The button DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE) allows the start of a washing program to be advanced by 1 to a maximum of

19 hours.

0 To do this, press the button DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE) as often as necessary until the required start delay is

shown in the multidisplay, e. g.12h in the form for a program start delay of 12 hours.

If19h is shown and you press again, 0h and afterwards the run time of the set washing program appears (display in minutes, e. g.129). In this state, the delay timer is not set.

20

Page 20
Image 20
AEG 70730 manual Change Spin Speed / Select Rinse Hold, Set the Delay Timer/Soaking Duration