Safety, Correct Use | AEG 70730 instruction

Instructions for use

INSTRUCTIONS FOR USE

1Safety

The safety of AEG electrical appliances conforms to the recognised technical regulations and the legislation covering the safety of appli- ances. However, as manufacturers, we still regard it as our responsibility to inform you of the following safety information.

Before Putting into Operation for the First Time

•Refer to the ”Installation and Connection Instructions” later in this user information.

•When the unit is delivered in winter months with minus tempera- tures: Store the washing machine for 24 hours at room temperature before putting it into operation.

Correct Use

•The washing machine is only designed for normal domestic washing. If the unit is used for purposes other than that for which it is designed, the manufacturer can accept no liability for any resulting damages.

•For safety reasons, conversions or modifications to the washing machine are not permissible.

•Use only detergents which are suitable for washing machines. Follow the washing detergent manufacturer's instructions.

•The washing must not contain any flammable solvents. Also remem- ber this when washing pre-cleaned washing.

•Do not use the washing machine for chemical cleaning.

•Dyes/dye removers may only be used in washing machines if the manufacturer expressly allows these products. We cannot be held lia- ble for any resulting damage.

•Use only water from the water mains. Use rainwater or service water only if it meets the requirements outlined in DIN1986 and DIN1988.

•Frost damage is not covered by the warranty! If the washing machine is in a room which is at risk from frost, an emergency emptying oper- ation must be carried out when there is a frost risk (see the section ”Carry Out Emergency Emptying”).

6

Image 6

AEG 70730 manual Safety, Before Putting into Operation for the First Time, Correct Use

Contents

ÖKO-LAVAMAT 70730 update Dear customer Tel /3630444 Contents Remedying Faults What to do if Contents Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General Safety Dispose the packing material DisposalEnvironment Tips Dispose the old appliance Unit Description Front ViewDrawer for Washing Powder and Care Agent Control Panel Program Selector EASY-CARES KREUKHERSTELLEND, Defroissable Woollens WOL, LAINE/P Handwash Additional Program Buttons PRE Wash VOORWAS, Prelav Consumption Values and Time Requirements What Does Update Mean? Water Protection Aqua Control Before the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerWater Hardness Details Run a Washing Cycle Brief InstructionsAfter the Washing Program Ends Set the Washing Program Set the Delay Timer/Soaking Duration Change Spin Speed / Select Rinse Hold Soaking Duration This run time is comprised as follows Opening and Closing the Filling Door Add the Washing Compartment for pre-wash agent/soaking agent If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Or for water softener Start the Washing Program If the time preselection is set Program Sequence Display Completion of the Washing ProgramChanging a Washing Program Multi-Display Select the Additional Program Change the Spin Speed Washing Cycle Ended/Remove Washing Program Tables Washing EASY-CARES PRE Wash Separate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Remedying Faults What to do if RINCAGE+ flashes Water Sans Repassage Washing detergent If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained off Emergency Unlocking of the Filling Door Cancel Additional Rinse Additional Rinse RINSE+/SPOELEN+/RINCAGE+Set Additional Rinse Child Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for Installation When transporting the unit with a sack trolley Setting Up the UnitRemove the Transport Safeguard Transporting the Unit Firmly pull both hose holders off the unit Prepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Page Page Index Service When do you incur costs even during the warranty period?