Water Inflow | AEG 70730 guide

Setting up and connection instructions

Water Inflow

A pressure hose 1.5m in length is supplied.

If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections offered by our Customer Service is permissible.

–Sets of hoses in lengths of 2.2m, 3.5m and 5m are available for washing machines without Aqua-Control.

–Sets of hoses in lengths of 2.0m, 2.9m and 3.9m are available for washing machines with Aqua-Control.

Attention! Never cut into pieces in order to extend the hoses!

3Sealing rings are supplied either in the plastic nuts of the hose screw connection or in the

enclosed pack. Do not use other seals!

0 1. Connect the hose with the angled connection to the machine.

Attention!

– Do not lay the supply hose vertically downwards. Rather, turn it to the right or left as shown in the diagram.

– Only tighten the screw connection manually.

2. Connect the hose with the

straight connection to a water tap with a screw thread of R 3/4 (inches).

Attention! Only tighten the screw connection manually.

3. By slowly opening the water tap before putting the washing machine into operation, check whether the connection is free of leaks.

49

Image 49

AEG 70730 manual Water Inflow

Contents

ÖKO-LAVAMAT 70730 update Tel /3630444 Dear customer Contents What to do if Remedying Faults Contents Before Putting into Operation for the First Time SafetyCorrect Use General Safety Child Safety Environment Tips DisposalDispose the packing material Dispose the old appliance Front View Unit DescriptionDrawer for Washing Powder and Care Agent Program Selector Control Panel Woollens WOL, LAINE/P Handwash EASY-CARES KREUKHERSTELLEND, Defroissable PRE Wash VOORWAS, Prelav Additional Program Buttons Consumption Values and Time Requirements Water Protection Aqua Control What Does Update Mean? Prepare the Washing Cycle Before the First WashSort and Prepare the Washing Washing Types and Care Codes Water Softener How much washing detergent and care agent?Water Hardness Details Brief Instructions Run a Washing CycleAfter the Washing Program Ends Set the Washing Program Change Spin Speed / Select Rinse Hold Set the Delay Timer/Soaking Duration This run time is comprised as follows Soaking Duration Add the Washing Opening and Closing the Filling Door Add Washing Detergent/Care Agent If using Liquid Detergent/TabsCompartment for pre-wash agent/soaking agent Or for water softener If the time preselection is set Start the Washing Program Changing a Washing Program Completion of the Washing ProgramProgram Sequence Display Multi-Display Change the Spin Speed Select the Additional Program Washing Cycle Ended/Remove Washing Washing Program Tables EASY-CARES PRE Wash Separate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Washing Detergent Drawer Cleaning and Care Filling Door Washing Drum What to do if Remedying Faults RINCAGE+ flashes Water Sans Repassage Washing detergent If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation When all the washing solution has drained off Clean the Solution Pump Emergency Unlocking of the Filling Door Additional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancel Additional RinseSet Additional Rinse Setting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting UP and Connection Instructions Remove the Transport Safeguard Setting Up the UnitWhen transporting the unit with a sack trolley Transporting the Unit Firmly pull both hose holders off the unit Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Dimensions Technical DataDelivery Heads over 1m Page Page Index When do you incur costs even during the warranty period? Service