Changing spin speed/selecting rinse hold

Changing the temperature

Press the TEMP. key repeat- edly until the desired tem- perature is

displayed.

LINEN/EASY CARE	12.45
Cycle end at	14.37

50C1600 aýýýýýaýaýaýaýaýaýaýaýa

TEMP.

RPM

OPTIONS

TIME

Changing spin speed/selecting rinse hold

Press the RPM key repeated- ly, until the desired spin

speed or RINSE HOLD is displayed.

LINEN/EASY CARE	12.45
Cycle end at	14.37

50C 800 aýýýýýaýaýaýaýaýaýaýaýa

3 • With spin speed “0” the TEMP. RPM OPTIONS OK TIME

last rinse water is drained off at the end of the cycle, but the washing is not spun.

•With RINSE HOLD the washing is left to soak in the last rinse wa- ter. There is no final spin after the intermediate spin(s). Intermediate spins are programme-dependent and cannot be altered.

Page 14

Image 14

AEG 86810 manual Changing spin speed/selecting rinse hold, Speed or Rinse Hold is displayed

Contents

Lavamat Following symbols are used in the text Dear Customer Contents Installation and connection instructions Safety information concerning installation Child safety SafetyPrior to using the appliance for the first time General safety Resulting overheating may constitute a fire hazard What is shown in the display Cycle end at Program overview Easy Iron Use/Features Care Symbols1 R a c h e Prior to using for the first timeN g u a g e Programmende um Carrying out a wash programme prior to first use Setting the timePreparing and sorting washing Preparing washing Adding detergent/conditioner Running a wash cycleOpening the door/Loading the washing Washing powder/tablets for the main wash cycle Switching on the appliance/selecting a programmeIf you are using liquid detergent With spin speed 0 the TEMP. RPM Options OK Time Changing spin speed/selecting rinse holdSpeed or Rinse Hold is displayed Setting options Setup Sensitive To switch off the optionPrewashing Prewash, Sensitive, Stain, Night Cycle Time saving Setting timesDelay Start Time Saving Short or Very Short Start Delay StartStart in 4h Press the OK key. Start in 0 min is shown in the display Programme progress WashingStarting a programme Interrupting a programme/Adding washing If Rinse Hold or Night Cycle was selected SetupWashing cycle complete/Removing the washing Memory 1, 2 Setting the MemoryMemory Store program Changing the Memory Extra Rinse U n dN s e + Clock Set timeLanguage Contrast and brightness Child safety deviceDesired setting. With Each press of the key or if Deactivating the child safety device Cleaning and maintenanceCleaning procedure Detergent dispenser drawer Door and rubber collar Clean the glass in the door and the rubber collar regularlyWashing drum Top of the washing-in chamber, with a brush What to do if Remedying small malfunctions Adjusted Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washing When the water has all drained away Carrying out an emergency drain Drain pump Old appliance DisposalPackaging material Technical data Consumption values Transporting the appliance Safety information concerning installationInstalling the appliance This washing machine cannot be built-in Unpacking When using a sack trolley to transport the washing machineRemove the power supply cable Only use the sack trolley on the side of the appliancePage Where to install Electrical Connection Making the appliance level Brown Live Wire coloured green and yellow Permanent Connection Water inlet Connecting to the water supplyPermitted water pressure Open the porthole and extract the inlet hose Water Drainage Pumping heights of over 1 metre For drainage into an outlet Guarantee/Customer Service Great Britain European Guarantee LU4 9QQ Slovenija For general enquiries concerning 0870 5 929Customer Care Major Appliances 132 977 Subject to change without notice

LINEN/EASY CARE

Cycle end at

Changing spin speed/selecting rinse hold

speed or RINSE HOLD is displayed.

Cycle end at

3 • With spin speed “0” the TEMP. RPM OPTIONS OK TIME