Memory 1, 2, 3
Programme combinations can be stored at programme knob positions MEMORY 1, 2, 3 and can then be selected using the programme knob. To do this the desired programme combination is first put together and then stored.
Setting the Memory
Example: Programme posi- tion MEMORY 1 is to be giv- en the following programme combination: LINEN/EASY CARES 40 °C, 800 rpm, with
PREWASH.
1.Turn the programme knob to
LINEN/EASY CARES.
| LINEN/EASY CARE | 12.45 | ||||||||
| Cycle end at | 14.37 | ||||||||
| 40C 800 | aýýýýýVýaýaýaýaýaýaýaýa | ||||||||
|
|
|
|
|
|
|
|
|
|
|
| TEMP. | RPM OPTIONS OK | TIME | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.Press the TEMP. key repeatedly, until 40 °C appears in the display.
3.Press the RPM key repeatedly, until 800 appears in the display.
4.Using the OPTIONS key 
set PREWASH and press the OK key. A black bar appears under the PREWASH symbol 
.
5.Press the OPTIONS key repeatedly, until the SETUP symbol 
flashes.
6.Press the OK key. The display changes to the Special Func- tions level. Programme memory position MEMORY 1 is offered first.
3To change to another memo- ry position, press the OP- TIONS key.
Memory 1
Store program
aýýýýýaýaýaýaýBýaýaýaýa
| TEMP. |
| RPM |
| OPTIONS |
| OK |
| TIME |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7.Press the OK key.
The programme combination is now stored to programme knob posi- tion MEMORY 1 and in the future can be selected directly using the programme knob.
3The Memory can be overwritten at any time with a new programme combination (see “Changing the Memory”), but cannot be deleted.
Changing the Memory
1.Put together the new programme combination as required (for an ex- ample, see “Setting the Memory”, steps 1 to 4).
2.Press the OPTIONS key repeatedly, until the SETUP symbol 
flashes.
3.Press the OK key.
21
