7. Open the porthole and remove the polystyrene block fitted with the ad- hesive tape on the door seal.

8. Fill the smaller upper hole and the two large ones with the correspond- ing plastic plug caps supplied in the bag containing the instruction booklet.

Important!

All the different plug caps are sup- plied with the appliance in the plas- tic bag containing the instruction booklet.

Connect the water inlet hose as described under the paragraph “Water inlet”.

Where to install

Important! The washing machine must not be operated in a room where there is a danger of frost. There is a risk of frost damage or ad- verse effect on the perfomance of the machine. Frost damage is not covered under the warranty.

The surface on which the appliance is to be installed must be firm and level. Do not install the appliance on carpeted floors or soft floor coverings.

The surface on which the appliance is to be installed must be clean and dry and free from grease, so that the appliance does not slide.

If the location in which the appliance is to be installed is fitted with small-format tiles, put a rubber mat (available in the shops) under the appliance.

37

Page 37
Image 37
AEG 86810 manual Where to install