Safety information concerning installation | AEG 86810 guide

Installation and connection instructions

1Safety information concerning installation

•This washing machine cannot be built-in.

•Before using for the first time, check the appliance for damage sus- tained while it was being transported. Do not under any circumstanc- es connect an appliance that is damaged to the mains. In the event of damage to the appliance contact your supplier.

•Be sure to remove all the components of the transport lock before us- ing the appliance for the first time. Otherwise when spinning damage may be caused to the appliance or to neighbouring units or furniture.

•Before using the appliance for the first time, splash protection must be completed. (See “Removing transit packaging”).

•Always plug the mains plug into a correctly installed shockproof socket.

•If hard-wired: hard-wiring to the mains may only be carried out by an a qualified electrician.

•Prior to using the appliance for the first time, ensure that the rated voltage and current on the rating plate match the mains voltage and current where the appliance is to be installed. The required fuse pro- tection is also to be found on the rating plate.

•If work on the plumbing is required for the proper connection of the washing machine to the water supply, this must be undertaken by a registered plumber.

•If work on the electricity supply system is required for the proper connection of the washing machine to the electricity supply, this must be undertaken by a registered electrician.

•The washing machine’s mains cable must only be replaced by a Service Force Engineer

Installing the appliance

Transporting the appliance

1Warning: The washing machine is very heavy. There is a risk of injury. Exercise care when lifting the appliance.

34

Image 34

AEG 86810 manual Safety information concerning installation, Installing the appliance, Transporting the appliance

Contents

Lavamat Following symbols are used in the text Dear Customer Contents Installation and connection instructions Safety information concerning installation Child safety SafetyPrior to using the appliance for the first time General safety Resulting overheating may constitute a fire hazard What is shown in the display Cycle end at Program overview Easy Iron Use/Features Care Symbols1 R a c h e Prior to using for the first timeN g u a g e Programmende um Carrying out a wash programme prior to first use Setting the timePreparing and sorting washing Preparing washing Opening the door/Loading the washing Running a wash cycleAdding detergent/conditioner If you are using liquid detergent Switching on the appliance/selecting a programmeWashing powder/tablets for the main wash cycle Speed or Rinse Hold is displayed Changing spin speed/selecting rinse holdWith spin speed 0 the TEMP. RPM Options OK Time Setting options Setup Sensitive To switch off the optionPrewashing Prewash, Sensitive, Stain, Night Cycle Time saving Setting timesDelay Start Time Saving Short or Very Short Start Delay StartStart in 4h Press the OK key. Start in 0 min is shown in the display Programme progress WashingStarting a programme Interrupting a programme/Adding washing Washing cycle complete/Removing the washing SetupIf Rinse Hold or Night Cycle was selected Memory 1, 2 Setting the MemoryMemory Store program Changing the Memory N s e + U n dExtra Rinse Language Set timeClock Contrast and brightness Child safety deviceDesired setting. With Each press of the key or if Deactivating the child safety device Cleaning and maintenanceCleaning procedure Detergent dispenser drawer Door and rubber collar Clean the glass in the door and the rubber collar regularlyWashing drum Top of the washing-in chamber, with a brush What to do if Remedying small malfunctions Adjusted Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washing When the water has all drained away Carrying out an emergency drain Drain pump Packaging material DisposalOld appliance Technical data Consumption values Transporting the appliance Safety information concerning installationInstalling the appliance This washing machine cannot be built-in Unpacking When using a sack trolley to transport the washing machineRemove the power supply cable Only use the sack trolley on the side of the appliancePage Where to install Electrical Connection Making the appliance level Brown Live Wire coloured green and yellow Permanent Connection Water inlet Connecting to the water supplyPermitted water pressure Open the porthole and extract the inlet hose Water Drainage Pumping heights of over 1 metre For drainage into an outlet Guarantee/Customer Service Great Britain European Guarantee LU4 9QQ Slovenija For general enquiries concerning 0870 5 929Customer Care Major Appliances 132 977 Subject to change without notice