Electrical Connection

The oven is designed to be connected to 230-240V~(50Hz) electricity supply.

The oven has an easily accessible terminal block which is marked as follows:

Letter L

-

Live terminal

Letter N

-

Neutral terminal

E - Earth terminal

1This oven must be earthed!

The cable used to connect the oven to the electrical supply must comply to the specifications given below.

For UK use only

Connection

Min. size

Cable/flex

Fuse

via

Cable/flex

type

 

Cooker Control Circuit

2,5 mm2

PVC/PVC

min: 15A

 

 

twin and earth

max: 20A

 

 

 

 

It is necessary that you install a double pole switch between the oven and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current regulations.

The switch must not break the yellow and green earth cable at any point.

Important

After installation and connecting, the cable must be placed so that it cannot at any point reach a temperature of more than 50°C above the ambient temperature.

Before the oven is connected, check that the main fuse and the domes- tic installation can support the load; and that the power supply is prop- erly earthed.

The manufacturer declines any responsibility should these safety measures not be carried out.

37

Page 37
Image 37
AEG B1180-4 manual Electrical Connection, Earth terminal, This oven must be earthed, For UK use only