Operating Instructions
Before using for the first time
Setting/Changing the Time
The time display will flash after the electrical supply is connected. You must then first set the time.
If the time has not been set, the oven cannot be switched on.
Setting the Time
01. Press the Mbutton.
2.Set the current time within
5 seconds using the + or - but- tons.
The time appears in the display.
The oven is now ready for use.
3 | By pressing the + or - button |
| for more than 2 seconds, the |
| minutes will start to run forwards |
| or backwards until the button is |
| released again. By this means you |
| can reach the required setting |
| quikker. |
3 | If the appliance has been isolated from the mains, e.g. due to a power |
| failure, the time display will flash again. |
In this case reset the time again, as described above.
Changing the Time
If you wish to correct the time, e.g. on the change over from summer to winter time, repeat the process described under “Setting the Time”.
13
